Bottling monobloc 6.1 with corker

Description

Full automatic monoblock filling unit with FILLER and CORKER FOR STRAIGHT WINE CORK. Filling Valves: The 1000 times proven filling valves of the Evolution 2 series can work with gravity (drop pressure) as well as under negative pressure (light vacuum). Filling under slight negative pressure (optional) on the one hand causes a better release of the filling and on the other hand it is helpful with slightly foaming products and prevents dripping on the filling valve with worn-out seals. The height of the bottle is adjusted by handwheel (manual) or can also be done electrical (optionally). The filling height is set by means of appropriate spacers which are used in the filling valves. Pneumatic lifting of the bottle plate and mechanical lowering via cam (no air consumption). The tub has a central liquid inlet and is mirror polished inside. Total discharge drain with ball valve installed on the bottom of the tank. The opening of the filling valves for sterilization (for example with steam) or for cleaning takes is achieved by stainless steel clips. Filling valves are easy to remove and can be completely disassembled easily. Optionally available are two models of cleaning adapters which are used for final cleaning. A cleaning water collection trough installed under the filling valves or in alternative a cleaning rim with dummy bottles which allows to collect the cleaning solution under the valves and wash the valves also in countercurrent (backwash). The liquid feed into the filler tank is controlled via sensors. The sensors will command the pneumatically operated product supply valve and a pump control. Corker for natural, agglomerated and synthetic corks for vine bottle. Construction of stainless steel with stainless steel head, bronze chariots and jaws of hardened and ground N690 steel. Simple adjustment of the closure of the jaws on eccentric pivot. Big capacity hopper with new-design mechanical cork selection disc. Cork plunger mounted on self-lubricating bushes and rods of chrome-plated steel ground for absolute absence of clearance even due to wear. As option is available the innovative vacuum closure that does not use any vacuum pumps but a yet of compressed air exploiting the principles of Venturi tube. The frame of the monobloc is made of stainless steel. All doors are equipped with safety devices in the hinge. The control of the monoblock is carried out via a central control cabinet made of stainless steel. The system is easy and clear to use and also the format change can be accomplished quickly. Thanks to the modular design and the wide range of additional options, the machine can be optimally adapted to the needs of the company. The system is supplied with belt, belt drive and bottle collection table. In addition, larger bottle feeding tables are available Ø600-800-1000mm and bottle collecting tables Ø600-800-1000mm with belt drive at the end of the line. Belt connections between different machines are available on request (options). Filling Monoblock in linear design with single-head ROPP capper . Filler: 6 valves 500-800b Capper: single head corker with fully automatic cork distribution max. 1800b / h.
Product code: 36350

Recommended Products

Bottling monobloc 6.6.1 with screw capper
Rotary rinser 10 bottles in SS
Monobloc full automatic screw capper 1500b/h

Categories

Juice, wine, cider making

Orchard and viticulture

Technical products

Homemade

Garden